Cpanel CSR / SSL setup

CSR /SSL Setup for Cpanel

Step 1: Generate a Private Key

  1. Login to cPanel.
  2. Click SSL/TLS Manager > Private Keys (KEY).
  3. Scroll down near the bottom of the page to the Generate a New Key section.
  4. Select the desired domain name from the pull-down menu, or type it into the Host field (e.g., www.domain.com).
  5. Select the key bit-length. We recommend 2048 (2048 is required for EV certificates).
  6. Click the Generate button to generate the new key.
  7. A new private key is generated and is stored on the server.

Step 2: Generate a Certificate Signing Request (CSR)

  1. Click SSL/TLS Manager > Certificate Signing Request (CSR).
  2. Using the CSR Legend on the right-hand side of this page, fill out the Generate a New Certificate Signing Request form.
  3. Click the Generate button to generate the new CSR.
  4. cPanel shows you the CSR in the top box under SSL Certificate Signing Request (don't worry about the contents of the box below it, you don't need it).
  5. Copy everything in the top box.
  6. Save a copy of your CSR. The CSR will be needed during the online order process. You'll be asked to copy-and-paste your CSR into a special CSR box.

    Below is an example of what your CSR will look like. This is a example only and cannot be used to generate your SSL certificate.
    -----BEGIN CERTIFICATE REQUEST----- MIIB3zCCAUgCAQAwgZ4xCzAJBgNVBAYTAlVTMRAwDgYDVQQIEwdHZW9yZ2lhMRAw DgYDVQQHEwdBdGxhbnRhMREwDwYDVQQKEwhHZW9DZXJ0czEaMBgGA1UECxMRSW5l cm5ldCBNYXJrZXRpbmcxGTAXBgNVBAMTEHd3dy5nZW9jZXJ0cy5jb20xITAfBgkq hkiG9w0BCQEWEmFkbWluQGdlb2NlcnRzLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOB jQAwgYkCgYEA5KOi+RnRzBuBQeFYjrwZg1sfT7zr4L8j0Khuoj621x+lGBmFC76c kGclUIQBmuyp9T9NrNqAjGtEmgdFr6cWLJtgXgi+BaZDLX9BMYF49NuTggNoEUMX crQRAENHb2YthG2SEcF5p98RNcDPzWOA3a4AMvgkxDlDGYUhbcQhnt0CAwEAAaAA MA0GCSqGSIb3DQEBBAUAA4GBAIapt6Tw0BTYUwEAX0/oKvaaN/ghErR85jdW7xOD b1hL0yNfb495A7e/IQyBEP5a/v+QUOtibHS4geiPhH9etAI+DSQmctjbf6dMGJql gCXGwlsTbjPOSmNT+/X2Uvf1BlplwqAMDghEuFHsjshlypz1NEg94ri2K9N1VrBs
    +iAv
    -----END CERTIFICATE REQUEST-----

Step 3: Download and copy your certificate files to your server

Download your SSL certificate and support files by clicking on the download link in your fulfillment email or from your SSL Manager account. Unzip the files and copy them into the directory where you will keep your certificates. Some files in the zip may or may not be used depending on your server type.

Step 4: Install the SSL Server Certificate Files

  1. Login to cPanel
  2. Click SSL/TLS Manager > Certificates (CRT) > Generate, view, upload or delete SSL certificates
  3. In the Upload a New Certificate section click the Browse button and locate your SSL Server Certificate file your_domain_com.txt.
  4. Click the Upload button.
  5. Click the Go Back link to return to SSL/TLS Manger.

Step 5: Setup the Domain

  1. Click SSL/TLS Manager > Setup a SSL certificate to work with your site.
  2. From the Domain drop down menu select the domain that will use the SSL Certificate. The system will attempt to Fetch the SSL Certificate and corresponding private key.
  3. Open Intermediate.txt in Notepad or other simple text editor (not Word). Copy-and-paste all the contents of the Intermediate.txt file into the Ca Bundle (CABUNDLE) box.
  4. Click on Install Certificate. You should receive a message that the certificate was successfully installed. If you receive an error you may need to contact your web hosting provider for additional support.

Step 6: Verify Installation

Test your SSL certificate by using a browser to connect to your server. Use the https protocol directive. For example, if your SSL was issued to www.mysite.com, enter https://www.mysite.com into your browser.

Your browser's padlock icon Browser padlock will be displayed in the locked position if your certificate is installed correctly and the server is properly configured for SSL.

  • 0 משתמשים שמצאו מאמר זה מועיל
?האם התשובה שקיבלתם הייתה מועילה